Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personnel and equipment in the laboratories. A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in the high up atmosphere through ducting. Fabricated out of thick ply board clad from cladding from outside with laminated sheet and inside finished in non-corrosive epoxy paint. An up-down sliding sash with glass sheet is provided. Fluorescent lighting is also provided. A gas tap, water tap and wash basin is also provided.
These are created to deplete toxic, or else harmful vapors etc, for protecting laboratory personnel and equipment. Fume exhaust hoods offered by us are made of waterproof ply & block boards. Its outer body is fabricated from laminated sheets and interiors lined with stuff paint.
The Fume hoods naturally protect only the person and are highest often used in labs, the place where noxious chemicals or detrimental are released research development, during examining, practicing and also used in industrial programs or other activities where noxious vapors or gases or hazardous or clouds of dust are generated or released.
-Free from contaminants. -Free from contaminants.
-Two-stage filtration
-Provided with HEPA-filter
-5/15 Amp switch socket for outer equipment
-Well-balanced Motor-blower with suspension arrangement reduces the Noise level.
